Download Print this page
CAMION ICE MASTER E Series Owner's Manual
Hide thumbs Also See for ICE MASTER E Series:

Advertisement

Quick Links

ICE MASTER E-SERIES
®
OWNER'S MANUAL
Product Codes:
IMS250E217, IMS300E17
IMS - E Series
IMS500E17
Version 1.3
Copyright © Enduraplas. All Rights Reserved.

Advertisement

loading

Summary of Contents for CAMION ICE MASTER E Series

  • Page 1 ICE MASTER E-SERIES ® OWNER’S MANUAL Product Codes: IMS250E217, IMS300E17 IMS - E Series IMS500E17 Version 1.3 Copyright © Enduraplas. All Rights Reserved.
  • Page 2: Table Of Contents

    English English CONTENTS INTRODUCTION Congratulations! You now own an Camion™ sprayer. INTRODUCTION Durable design and construction assure you a lifetime of extreme performance. No sprayer is tougher. No sprayer will last longer. WARNINGS 4 & 5 Take a look through this owner’s manual to learn how the pros use their Camion™...
  • Page 3: Warnings ! 4

    English English WARNINGS 1. Do not exceed vehicle manufacturers loading, towing or 13. No modifications and/or alterations may be made to this lifting specifications and regulations. sprayer. Any such modifications not only void the sprayer 2. Ensure tank is firmly secured in an appropriate manner. warranty but can make the unit dangerous to anyone 3.
  • Page 4: Getting Started

    English English GETTING STARTED GETTING STARTED Setting-up the Sprayer Setting-up the Sprayer 5) Feed the wire harness through the 1) Wind the hose reel handle into place. whole in the back of the metal box. 6) Connect the cables to the pumps. 2) If you ordered a hitch mount boom for Make sure to plug in the correct your Ice Master®...
  • Page 5 English English GETTING STARTED GETTING STARTED Operating the Sprayer Setting-up the Sprayer 1) You will need to complete a liquid re- 9) Hook up the power cables to your circulation test before using the sprayer. battery. Start by filling the tank at least 1/4 full of water.
  • Page 6 English English GETTING STARTED GETTING STARTED Operating the Sprayer Operating the Sprayer Pro Tip: 5) Switch on all three pumps, using the When you are spraying using all three pumps, you will solenoid controller. be outputting approximately 10 gallons per minute. 8) If you wish to fill the tank from an 6) Once the pumps are running, check external source, hook up your fill hose to...
  • Page 7 English English GETTING STARTED Operating the Sprayer 11) Unscrew the cap and remove the filter for cleaning. 12) To drain your tank, remove the cam-lock cap on the front of the frame and open the valve. This will completely drain the tank as the hose is fed from the bottom sump in the tank.
  • Page 8 English English GETTING STARTED GETTING STARTED Installing the Sprayer Installing the Sprayer 1) The two openings at the front of the 5) If you ordered a storage stand, you frame allow you to move the unit using can attach the legs with the pin system fork points.
  • Page 9 English English GETTING STARTED Connecting the Boom 1) Slide the boom on to the quick attach brackets. 2) Tighten the hardware making sure the square neck on the carriage bolt is fully inserted through the slot. 3) Take the hose, connect it to its fitting, and tighten it using the camlock.
  • Page 10: Calibrating 18

    English English CALIBRATING GPM = Gallons Per Minute GPA = Gallons Per Acre Note: Always double check your application rates. GAL/1000 FT = Gallons Per 1000 Square Feet The rate/acre listed is only based off the center section W = Nozzle spacing (not the two side nozzles) Gallons Per Minute Formula: GPA x MPH x W (per nozzle)
  • Page 11: Maintaining 20

    English English MAINTAINING If required If damaged Every 250 operating Keeping your sprayer in good condition will help you hours o once a year lengthen the life of the sprayer. Everyone knows a well After the first 5 maintained piece of equipment ensures a longer life span. operating hours Sprayer maintenance can seem a huge task if you don’t Weekly or every 40...
  • Page 12: Troubleshooting 22

    English English TROUBLESHOOTING CONDITION CAUSE REMEDY CONDITION CAUSE REMEDY Pump will not 1) Air leak on suction 1) Tighten/replace Pressure gauge 1) Plugged with debris 1) Un-thread, check prime plumbing fittings & hose not registering and clean pressure 2) Blocked/Restricted clamps.
  • Page 13: Warranty

    English English WARRANTY LIMITED WARRANTY 1. Poly Tank Limited Warranty - Subject to other terms in this Limited 3. Limitation of Liability under the Limited Warranty - In addition to Warranty, Manufacturer warrants to the original end user that this those warranties disclaimed and excluded in clause 2 above, Tank will be free from material defects caused during the Manufacturer expressly further limits its warranty and liability...
  • Page 14 English English 3.2. Without limiting the generality of clause 3.1: 5. Claims and Questions - If you have questions about this Limited Manufacturer will not be liable for any personal injury, Warranty or to make a warranty claim, contact Manufacturer at: indirect or incidental damages, consequential losses, loss customercare@enduraplas.com of liquids, loss of profit or any like claims whatsoever...
  • Page 15 OVERVIEW DETAIL VIEW A View D View A View A View B View C View B Ice Master E-Series Version 1.5 ®...
  • Page 16 DETAIL VIEW B DETAIL VIEW C View A View C View B Ice Master E-Series Version 1.5 ®...
  • Page 17 DETAIL VIEW D PARTS LIST ITEM NO. PART # DESCRIPTION QTY. AZFPM0300 300-400Gal FIre/ProMaster Frame AZKB0005SS 23.75" Stainless Steel Adj. Boom Bracket THD00300OE 300 Gal Sump Tank CFLP16HV 16 inch Hypro Lid Hinged AVB355 STBBS35 Lg Baffle Ball CPA0100 Ice Master Base Mount Hose Reel IMSC1004 Ice Master Pump Box E-Series CBBF235...
  • Page 18 OVERVIEW OVERVIEW View B View A View C IMSC1004 A B C Ice Master E-Series Version 1.5 ®...
  • Page 19 DETAIL VIEW A DETAIL VIEW B View A View B 21 37 Ice Master E-Series Version 1.5 ®...
  • Page 20 DETAIL VIEW C PARTS LIST ITEM NO. Part # DESCRIPTION QTY. CSLC354 CSLC355 Electric Deicing Pump Box CSLC356 AVPC01 Pump Engine Cover CEWCIM04 IM Wire Harness-E Series AZKF0022 Flexible Rubber T-Handle Draw Latch APD07G060PQB 7 GPM 60PSI, Bypass, 1/2" Quick Attach APD05G060P 5 GPM 60 PSI QA Pump CPPDD006...
  • Page 21 PARTS LIST DETAIL VIEW HOSE REEL ITEM NO. Part # DESCRIPTION QTY. ITEM NO. PART # DESCRIPTION QTY. CLUESB020004 .75 IN EPDM Hose Return to Tank AMAH01GY HR030/050 REEL ONLY CLUESB020002 .5 IN EPDM Hose 2-way valve to Hose Reel CFCC003 Clamp for 1/2"...
  • Page 22 OVERVIEW DETAIL VIEW A ITEM NO. Part # DESCRIPTION QTY. AZFPM005 IMS4-6 Stainless boom bracket AMICS001 Poly Shroud For Deicing Boom AZFPM020 1" x 17-3/4" Poly Pipe For Deicing Boom AZFPM022 1" x 14-13/16" Poly Pipe For Deicing Boom AZFPM021 1"...
  • Page 23 English English ACTIVATE YOUR 10-YEAR WARRANTY How to Activate To double your 5-year tank warranty, visit www.camionsystems.com/warranty/ and register this product. Watch Instruction Videos: www.youtube.com Discover More Helpful Tips: www.IceControlTraining.com Ice Master E-Series Version 1.5 ®...
  • Page 24 ® CAMION by Enduraplas 1 (877) 265-9929 cs@camionsystems.com www.camionsystems.com 113 1st Street, Neche ND 58265, USA A Brand By Enduraplas Discover More Helpful Tips: www.IceControlTraining.com Copyright © Enduraplas. All Rights Reserved.

This manual is also suitable for:

Ims250e217Ims300e17Ims500e17