TSC PEX-2000 Series User Manual page 78

Date & Time Setup the date and time on display.
Security Set the password for locking the menu or favorites. The default password is 8888.
Ribbon Wound Set the ribbon wound direction.
Ribbon Tension Set the ribbon tension.
Set the warning for ribbon low. For example, if setting value is 30m, when ribbon
Ribbon Low Warning
capacity was lower than 30m, the
Check printhead status and to set the settings for printhead care.
Warning: Enable/disable the printhead clean warning. If enable this feature, once
printhead has been reached the setting mileage then the warning icon will be shown
on printer UI for reminding user to clean the printhead. The default setting is disable.
Printer Head Maintn
Reset Counter: Reset the printhead clean warning mileage after cleaning printhead.
Interval: This item is used to set the expected mileage for reminding user to clean the
printhead. You have to enable the "TPH warning lock" for use. The default setting is 1
km.
Key Sound This item is used to enable/disable the sound of front panel buttons.
This item is used to enable/disable the printer into pause mode (Off line). After
Pause Mode
selecting "enable", press the down arrow key and the printer will pause all actions.
Depending on the printer orientation, the display can be set to 0° (standard) or 180°.
LCD Invert
(Yes/ No)
Contact Us Check the contact information for tech support service.
will be shown in red.
N/A
Disable
Ink Side Out
Medium
30M
N/A
ON
Disable
NO
N/A
76