TSC PEX-2000 Series User Manual page 76

This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate writing.
Write EPC This executable menu writes all twos to the tag in range of the internal RFID coupler. It is
with 2s primarily intended for development verification by checking that the system is working.
Note:
This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate writing.
Statistics It is general read-only and used to gather and report statistics on how the RFID system is reporting on print jobs
sent to the printer.
Tag Write This menu item displays on the LCD the number of tags attempted to be written since the last
Count Clear Tag Stat operation has been initiated.
Tag Failed This menu item displays on the LCD the number of failed RFID tags since the last Clear Tag
Count Stat operation has been initiated.
Tag Read This menu item displays the number of tags read since the last Clear Tag Stat operation.
Count
Clear Tag This executable menu item clears the Count menu items in this submenu.
Stat
RFID Shows the RFID firmware version installed in the encoder.
Reader F/W
RFID Shows the RFID hardware version installed in the encoder.
Reader
Hd/W
74