Ethernet - TSC PEX-2000 Series User Manual

5.4.2 Ethernet

Ethernet configures internal Ethernet configuration and checks the printer's Ethernet module status, and reset the Ethernet module.
Menu
Item
Network Interface Select the network interface by Wi-Fi or Ethernet.
Status Check the Ethernet IP address and MAC setting status.
DHCP: On or OFF the DHCP (Dynamic Host Configuration Protocol) network protocol.
Configure
Static IP: Use this menu to set the printer's IP address, subnet mask and gateway.
Interface Ethernet
Description
Ethernet
Network Interface
Wi-Fi
Status
Configure
Default
N/A
N/A
DHCP
57