Smeg Classic PM3953D Manual page 16

Table of Contents

Advertisement

After selecting a cooking zone:
• Press and hold (1 to 8) power levels for at
least 3 seconds.
appears on the display of the cooking
zone.
• After the heating time has elapsed, the
cooking zone reverts to the previously
selected power level.
• This function can be deactivated by pressing
and holding the set power level for
• 3 seconds, or by selecting a lower one.
Minute minder timer
After having switched on the hob, without
having activated any cooking zone:
1. Simultaneously press the buttons inside the
timer setting area.
2. Use the
and
required time.
• The first digit on the left is used to select the
hours, the middle one to set the tens of
minutes and the one on the right the minutes.
3. After 10 seconds, the timer will start the
countdown.
4. When the time elapses, a series of beeps
will sound. Press any button to deactivate
them.
A maximum of 9 hours and 59 minutes
can be set.
Using the minute minder does not stop
the operation of the cooking zones but
rather informs the user when the set
minutes have run out.
Modifying or deactivating the timer
To modify or deactivate the minute minder
during the countdown:
1. Press the On/Off key
activate the hob (if it was on standby).
• The timer setting area will indicate the
minutes that were set.
48 - USE
buttons to select the
to
2. Use the buttons
the
minute minder time or reset it to zero.
3. After 10 seconds the timer
will start the new countdown or will be
deactivated.
Timed cooking
The timed cooking function can be activated
when at least one cooking zone is switched on:
1. Select the power level.
2. Touch the inside of the timer setting area.
• The flashing
above the cooking zone display.
3. Use the
and
required time.
4. Timed cooking will start a few seconds after
the last selection.
At the end of the set time, a buzzer warns the
user.
5. Press any button to deactivate the buzzer.
A maximum of 9 hours and 59 minutes
can be set.
This function can be activated on
multiple cooking zones at the same
time. The flashing LED and time indicator
refer to the next cooking zone to be
switched off.
Modifying or deactivating timed cooking
To modify timed cooking during the countdown:
1. Press the On/Off key
activate the hob (if it was on standby).
2. Press the display button of the timed cooking
zone.
• The timer setting area will indicate the
minutes that were set.
3. Use the buttons
the
minute minder time or reset it to zero.
and
to change
symbol will appear
buttons to select the
to
and
to change
91477A880/A

Advertisement

Table of Contents
loading

Table of Contents