Table of Contents
Advertisement
Quick Links
We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com
These instructions apply only to the destination countries listed on the appliance's data plate.
This is a class 3 built-in hob.
PRECAUTIONS
General safety instructions
Risk of personal injury
• During use the appliance and
its accessible parts become
very hot. Keep children well
away from the appliance.
• Protect hands with heat resistant
gloves during use.
• Never try to put out a fire or
flames with water: Turn off the
appliance and smother the
flames with a fire blanket or
other appropriate cover.
• This appliance may only be
91477A185/E
33
33
37
38
38
39
39
39
39
39
39
40
40
41
42
42
42
43
43
43
used by children aged 8 years
and over, and by people of
reduced physical, sensory or
mental capacity, or lacking in
experience in the use of
electrical appliances, provided
that they are supervised or
have been given instructions on
the safe use of the appliance
and of the hazards associated
with it.
• Children must not play with the
appliance.
• Keep children under the age of
eight at a safe distance unless
43
46
48
49
50
51
51
51
52
52
53
53
56
56
57
58
58
59
59
60
PRECAUTIONS - 33
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Smeg PM6743R
Summary of Contents for Smeg PM6743R
-
Page 1: Table Of Contents
We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com These instructions apply only to the destination countries listed on the appliance's data plate. - Page 2 they are constantly supervised. without monitoring them can be • Keep children under the age of dangerous and can cause a 8 away from the appliance fire. when it is in use. • Fats and oils can catch fire if •...
- Page 3 • Do not use or store flammable the glass ceramic cooking materials near the appliance or surface breaks, turn off the directly underneath the hob. appliance immediately. • Switch off the appliance Disconnect the power supply immediately after use. and call Technical Support. •...
- Page 4 • If any liquid does boil over or Risk of damaging the appliance spill, remove the excess from • Do not use abrasive or the hob. corrosive detergents (e.g. • Take care not to spill acid scouring powders, stain substances such as lemon juice removers and metallic or vinegar on the hob.
-
Page 5: Installation
dishwasher. of the hose does not exceed 2 • This appliance is not designed metres when fully extended for to operate with external timers steel hoses and 1.5 metres for or with remote-control systems. rubber hoses. • The gas connection hoses must Installation not come into contact with •... -
Page 6: Appliance Purpose
it does not come into contact overvoltage conditions, with the lower part of the hob pursuant to installation or a built-in oven below it. regulations. • Be careful when connecting • You should make sure that the additional electrical appliance is working correctly appliances. -
Page 7: Manufacturer's Liability
the appliance. appropriate recycling centre. • The explanations in this manual include Plastic packaging images, which describe all that regularly Danger of suffocation appears on the display. However, it should be kept in mind that the appliance may be • Do not leave the packaging or any part of it equipped with an updated version of the unattended. -
Page 8: Description
Information/Advice DESCRIPTION General description UR-3c • 1, 2: Induction cooking zones • UR: Ultra-rapid burner • 3: Control panel • A: 65 cm models. • AUX: Auxiliary burner • B: 75 cm models. • R: Rapid burner • C: 90 cm models. •... -
Page 9: Control Panel
Control panel Cooking zones area List of buttons Main controls area Scroll bar: increases or decreases the power level of a cooking zone. Warming function button: activates the keep warm function. List of icons On/Off button: turns the hob on or off. Auto-Vent 2.0 function button: activates communication between the hob and the Scroll bar and cooking: zone display: indicate... -
Page 10: Accessories
order to light the relative burners. Turn the knobs set power level exceeds the maximum limit permitted, the electronic circuit board will to the zone between the maximum automatically manage the power supplied by minimum setting to adjust the flame. Return the hot plates. -
Page 11: Preliminary Operations
Preliminary operations pan sizes indicated in the following table. Minimum diam- Recommended Cooking zones See General safety instructions. eter (mm) diameter (mm) 1 - 2 (Single) 90 - 110 170 - 190 • Remove any protective film from the outside 1 - 2 (Bridge) 190 - 230 or inside of the appliance, including any... - Page 12 devices are located together on the front panel. matching fixing pins on the surface. The burner controlled by each knob is shown next to the knob. The appliance is equipped with an electronic ignition device. Simply press the knob and turn it anti-clockwise to the maximum flame symbol, until the burner ignites.
- Page 13 Booster or Double Booster function (see Booster function specific sections). See General safety instructions. The Booster function allows you to heat a pan at maximum power for a limited amount of time. It can be used to bring a large amount of water to the boil rapidly.
-
Page 14: Additional Functions
Bridge function (on some zones only) Correct pan position This function automatically divides the power equally between both zones that are in use. This function allows you to operate two cooking zones (front and rear) at the same time when using pans such as fish kettles or long pans. - Page 15 Modifying and deactivating the minute 3. Use the buttons to select the minder timer required time; press and hold to advance To modify or deactivate the timer during the more quickly. countdown: 4. Timed cooking will start a few seconds after the last selection.
-
Page 16: Special Functions
This function can be deactivated by selecting 2 Timed cooking. and a different power level or by switching the 3 Bridge Function. appliance off. 4 Rapid heating. Pause function (on some models only) 5 Booster and Double Booster Functions. This function allows you to pause the operation 6 Controls lock. -
Page 17: User Menu
function. progressive number on the timer display. Auto-Vent 2.0 function (on some models Option Description only) Power limitation (kW) - Modifica- tion restricted to the installer • This function allows you to control the speed of the hood extractor fan Activation and deactivation of the via a wireless connection. -
Page 18: Safety Features
configure the Auto-Vent 2.0 function in settings: automatic mode. 8 values can be selected. The following table shows a summary of the possible Hood fan speed Hardness level Hood lighting Delicate cooking Medium cooking Intense cooking 2 - 4 - 6 speed 1 speed 2 3 - 5 - 7... -
Page 19: Error Notifications
end, if the internal temperature is very high, the enabled: appliance is switched off automatically. • Press the buttons at the same Controls lock (on some models only) time for at least 3 seconds. This feature is designed to lock all the symbol will appear on the displays of hob controls during operation, except all the cooking zones and on the timer display. -
Page 20: Cleaning The Glass Ceramic Hob
residues with a wooden toothpick or a needle. dry thoroughly with a clean cloth. Dirt, which may have fallen on the hob while cleaning lettuce or potatoes, can scratch the hob when moving pans. Consequently, remove any dirt from the cooking surface immediately. Changes in colour do not affect the operation and stability of the glass. -
Page 21: Installation
The fuses blow or the circuit breaker of the There are cracks or fissures in the hob: residential electrical system trips repeatedly. • Turn off the appliance immediately, • Call Technical Support or an electrician. disconnect the power supply and contact Technical Support. - Page 22 onto the connector 3. issue a certificate of conformity. Connection to LPG Use a pressure regulator and make the connection on the gas cylinder following the guidelines set out in the standards in force. The supply pressure must comply with the values indicated in the “Burner and nozzle characteristics table”.
- Page 23 3. Remove the flame-spreader crowns and 3. Adjust the air flow by moving the air relative burner caps. regulator B to obtain the distance D given in the corresponding table (see “Gas types 4. Remove the screws that secure the hob and and countries”...
-
Page 24: Gas Types And Countries
replace the lubrication grease. Lubrication of the gas cocks should be performed by a specialised technician. Gas types and Countries Gas types 1 Natural Gas G20 20 mbar • • • • • • • • 20/25 mbar G20/25 • 2 Natural Gas G20 25 mbar •... -
Page 25: Electrical Connection
5 LPG G30/31 - 30/37 mbar UR-3c Rated heating capacity (kW) 1.10 3.10 3.30 Nozzle diameter (1/100 mm) Reduced flow rate (W) 1100 1800 1800 Primary air (mm) Rated flow rate G30 (g/h) Rated flow rate G31 (g/h) 6 LPG G30/31 - 37 mbar UR-3c Rated heating capacity (kW) 1.10... -
Page 26: Power Limitation Procedure
regulations. respected for the edges of the hob on the back as indicated in the assembly For the Australian/New Zealand market: instructions. The circuit breaker incorporated in the fixed • If the appliance is to be installed above an connection must comply with AS/NZS 3000. oven, the oven must be fitted with a cooling fan. -
Page 27: Mounting
edge of the hob before assembly. the appliance installed below. Do not use silicone to secure the hob. This would make it impossible to remove 1 Opens on bottom the hob without damaging it. 2 Opens on bottom and back On an empty kitchen Semi-flush mounting (mm) If there are other pieces of furniture under the... -
Page 28: Instructions For The Installer
1. Fit the clips by gently pressing them horizontally into the appropriate space. 2. Then turn them upwards to fix them in place. Instructions for the installer • If you use a plug to connect to the power supply, the plug must be accessible after installation.
Need help?
Do you have a question about the PM6743R and is the answer not in the manual?
Questions and answers