Table of Contents
Advertisement
Grill Function
This function is used to activate the
Bridge function automatically for the
right zones only. It is used when using a
griddle or cooking with long pans.
To activate the Grill function:
1. Place a griddle or a long pan on the right
zones.
2. Press the
button. The LED above it will
flash.
The
symbol appears on the front zone
display and the
symbol appears on the rear
zone display. The electronics will automatically
set the power level to 9 (preheating phase).
After 3 minutes of operation, the power will be
lowered to level 7 and the LED above the Grill
function button becomes steady.
Use the scroll bar to modify the power level at
any time.
Press the
button to deactivate the Grill
function.
Auto-Vent 2.0 function (on some models
only)
• This function allows you to control
the speed of the hood extractor fan
via a wireless connection.
• The hood must be designed to use
the Auto-Vent 2.0 function.
• The connection is always one way,
from the hob to the hood. It is not
possible to control the hob via the
hood.
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user menu.
This function has an automatic and a manual
mode:
• Automatic mode adjusts the hood extractor
fan speed according to the total power of
the appliance (see "User menu - option U2).
• Manual mode allows you to adjust the
extractor fan speed by pressing the
button.
After switching on the hob, to activate manual
mode:
91477A880/A
1. Press the
button.
2. Each subsequent press of the button
increases the hood fan speed according to
a cyclic sequence with 5 levels of
adjustment, from 0 (off) to 4 (maximum
speed).
To go back to automatic mode, the appliance
has to be switched off and on again.
Refer to the hood manual for more
detailed information.
Pause function
This function pauses the operation of all
the cooking zones.
To activate the Pause function:
1. Switch on at least one cooking zone.
2. Hold down the pause button
symbol
displays on all the cooking
zones.
To deactivate the Pause function:
1. Hold down the button
symbol, which has just been pressed, starts
to flash.
2. Press any button apart from the Pause
button.
3. The pause function has now been
deactivated and the previously set functions
are restored.
The cooking time limitation, the residual
heat indicators and the control lock
function remain enabled during the
Pause function.
When the power comes back on after
a power failure, the pause function will
be deactivated.
The pause function can be maintained
for a maximum of 10 minutes, after
which the appliance switches off.
Rapid heating function
This function is not available for power
level 9, Booster and Double booster
The rapid heating function heats one cooking
zone at maximum power for a limited time, after
which it continues cooking at the set power
level.
. The
. The pause
USE - 47
Advertisement
Table of Contents
