Installing Soundpoint; Connecting Network And Power Source; Ip 600 Sip - Polycom SoundPoint IP 600 SIP 1.6.x User Manual

This section provides basic installation
instructions and information for obtaining
the best performance with the Sound-
Point
additional information or assistance with
your new phone, please contact your sys-
tem administrator.

Connecting Network and Power Source

AC Power Option
In-Line Power Option
Get user manuals: See SafeManuals.com

Installing SoundPoint

IP 600 SIP phone. If you require
®
Connect the supplied Network cable be-
tween the LAN jack on the phone and the
LAN port on the wall or hub/switch device
port. Connect the DC plug on the AC
wall adapter to the DC jack marked on the
phone.
If the phone is connected to a compatible
Ethernet switch that can provide in-line
power, the phone will use that power op-
tion. Simply plug the supplied Network
cable between the LAN jack on the phone
and an available Power and Data port on
the In-Line Power switch.

IP 600 SIP

®
The SoundPoint
includes regulatory compliance informa-
tion that your system administrator should
review and can also be found at www.
polycom.com.
Cisco™ Catalyst™ In-Line
Power Switch
IEEE 802.3af compliant
In-Line Power switch
2
IP 600 SIP User Guide
®
(Optional)