Firmware Update - Hohem iSteady M6 Kit User Manual

❸ ❹
Press the M button five The second beep
times to enable the auto indicates that the
calibration and you will calibration is completed,
hear a beep sound. Please and the gimbal
do not touch the gimbal will be recentered
during calibration. automatically.
* Two short beeps, following the calibration failure, indicates
that the gimbal has been in the standby mode. Any button (except
the joystick) can wake up the gimbal. Then, follow the steps
above to re-calibrate.

Firmware Update

You will be prompted in the app Hohem Joy if a new firmware
update is available. Follow the on-screen instructions in the app
to update the firmware.
20