Powering On & Standby; Installing Magnetic Ai Vision Sensor - Hohem iSteady M6 Kit User Manual

Powering On & Standby
1. Press and hold for 3 seconds - Power on/off
2. When Powered On
Press twice: Enter the standby mode
Press once: Wake up the gimbal
3. Ultra-Wide-Angle Shot
Default mode as shown in the image 1: There's no obstruction
in front of phone screen.
Ultra-wide-angle shot mode as shown in the image 2: Switch to
this mode by pressing trigger four times and the roll motor will
be in front of phone screen for capturing unobstructed views.
❶

Installing Magnetic AI Vision Sensor

Power Button
❷
* Sold separately
Magnetic Installation
08