07 How to Use the Gimbal
On-board Features
Power button
Press and hold for 3 seconds: Power on/off
* When Powered On
Press twice: Enter the standby mode
Press once: Wake up the gimbal
M button
Press once: Switch between gimbal modes
(PF-PTF-L-POV)
Press three times: "ICP" Inception mode/360°
infinite spin shot
(Press the trigger twice to recenter the gimbal).
Press five times: Auto calibration
Press seven times: Remote control pairing
Press nine times: Clear the paired remote
control
Joystick
Push the joystick up & down: Tilt rotation
control
Push the joystick left & right: Pan rotation
control
11