Completing The Assembly Of The R6000 Ups In The Rack - Compaq R6000 Series Operation And Reference Manual

2-22 Compaq R6000 Series UPS Operation and Reference Guide
Completing the Assembly of the
R6000 UPS in the Rack
Figure 2-16. Placing the battery circuit breaker in the ON position
NOTE: If optional Extended Runtime Modules are attached, place the ERM battery circuit
breakers in the ON position after the UPS circuit breaker is placed in the ON position.
Attach the front bottom bezel using the two captive screws.
Figure 2-17. Attaching the front bottom bezel
2
1