Table of Contents
Advertisement
Thank you for purchasing Coolant Through Spindle CTS-2630. This spindle is designed for use with
small-diameter cutting drills with a coolant hole. The E3000 <CONTROLLER>, EM-3030T <Motor> and
<Air Line Kit> are required to drive this spindle. Read this and all the associated component Operation
Manuals carefully before use. Always keep this Operation Manual for future reference in a place that is
easily accessible to users.
Contents
1. CAUTIONS FOR HANDLING AND OPERATION
····································································································· P25
······································································································ P25
1. CAUTIONS FOR HANDLING AND OPERATION
■ Read these warnings and cautions carefully and only use in the manner intended.
■ These warnings and cautions are intended to prevent potential hazards that could result in personal
injury or damage to the device. They are classified as follows in accordance with the seriousness of
the risk.
Class
WARNING
CAUTION
···························································································· P24
·································································································· P25
······································································· P27
··················································································· P28
·············································································· P29
································································································ P30
············································································ P36
············································································· P36
················································································· P38
······················································································ P39
·········································································· P40
This indicates the presence of a hazard that could result in
personal injury or damage to the device if the safety
instructions are not followed properly.
This indicates a potential hazard that could result in
minor or moderate personal injury or damage to the device
if the safety instructions are not followed properly.
··············································· P21
······························································ P26
·································································· P38
Degree of Risk
21
Advertisement
Table of Contents
