JVC HR-S9600EU Instructions Manual page 19

Repea t Pla yba ck
Your video recorder can automatically play back the whole tape
50 times repeatedly.
ST ART PLAYBACK
Press PLAY .
1
ACTIVATE REPEAT PLAYBACK
Press PLAY and hold for over 5 seconds, then release.
2
● The Play indicator ( ) on the display panel blinks
slowly.
● The tape plays 50 times automatically, and then
stops.
STO P PLAYBACK
Press STO P at any time to stop playback.
3
N O TE:
Pressing PLAY , REW , FF or PAU SE also stops Repeat Playback.
Soundtra ck Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
D uring Playback
Pressing AU D IO on the remote control or AU D IO M O N ITO R on the recorder changes the soundtrack being played back as
follows:
Recorder's Front Panel
+
NORM
+ + NORM
Downloaded from: https://www.usersmanualguide.com/
TRACK
On-Screen Display
HI FI
L R
HI FI
L
HI FI
R
NORM
HI FI
NORM
Insta nt ReV iew
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
N O TE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE IN ST AN T
REVIEW
Press REVIEW . The recorder power comes on and the
1
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
● The front display panel tells you how many programmes
have been timer-recorded. If you have, for example, 3
programmes, " REVIEW" and "3" appear and blink. The
REVIEW indicator on the recorder also blinks. To
watch the first of the 3 programmes, press REVIEW
three times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
N O TES:
● Instant ReView is not possible while the recorder is in the
Timer mode.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
( pg. 35).
U SE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
EN
N O TES:
● " + " should normally be selected.
In this mode, Hi-Fi stereo tapes are
played back in stereo, and the normal
audio track is played back
automatically for tapes with only
normal audio.
● For instructions on recording stereo
and bilingual programmes, refer to
page 25.
● "O.S.D." must be set to "ON" or the
on-screen displays will not appear
( pg. 11).
19