JVC HR-S9600EU Instructions Manual page 17

Va ria ble-Speed Sea rch
ACTIVATE VARIABLE-SPEED
SEARCH
During playback or still, turn the SH U TTLE ring to the
1
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
page 16).
To resume normal playback, press PLAY .
N O TE:
Variable-speed search with TimeScan (
by pressing the remote control's
M a nua l Tra ck ing
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PRO G buttons.
O VERRIDE AUTO MATIC
TRACKIN G
Press on the remote to engage manual tracking.
1
ADJUST TRACKIN G
MAN UALLY
Press TV PRO G + or – to adjust tracking.
2
RETURN TO AUTO MATIC
TRACKIN G
Press on the remote to re-engage automatic
3
tracking.
N O TE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Sk ip Sea rch
SKIP O VER UN WAN TED
SECTIO N S
Press 30 SEC 1 to 4 times during playback. Each press
1
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
N O TE:
To return to normal playback during a Skip Search, press PLAY .
Downloaded from: https://www.usersmanualguide.com/
pg. 20) can be used
or button.
@ #
Index Sea rch
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
N O TE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE IN DEX SEARCH
Press or ( ™ or £ ). " ™ 1" or " £ 1" is
1
@ #
displayed on screen and search begins in the corre-
sponding direction.
● To access index codes 2 through 9, press
repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
Current position
A
–2
● When the specified index code is located, playback
begins automatically.
M a nua l Index M a rk / Era se
To mark an index code...
...during playback press IN D EX M ARK on the recorder.
● The recorder will mark an index code at that location.
● If "O.S.D." is set to "ON" (
screen while an index code is being marked.
To erase an index code...
...during playback or still press IN D EX ERASE on the recorder.
● The recorder will fast-forward to the nearest index code and
erase it. Playback continues after the index code is erased.
● If "O.S.D." is set to "ON" (
screen while an index code is being erased.
N ex t Function M emory
The Next Function Memory "tells" the recorder what to do
after rewinding. Before continuing, make sure the recorder
is in the Stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW , then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW , then press
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW , then press
seconds.
17
EN
£ 2
or
@ #
twice.
@
once.
#
B C D E F
–1 1 2 3
Index number
pg. 11), "MARK" blinks on the
pg. 11), "ERASE" blinks on the
within 2 seconds.
(or TIM ER ) within 2