Mocka Eden Low Shelf Assembly Instructions

Eden

Low Shelf

Thank you for your purchase. Please follow the instructions for correct

assembly. While we took great effort to ensure these assembly instructions

were correct at the time of printing, sometimes updates are required post

production. For the most up to date versions please refer to the product

page on our website. mocka.com.au/mocka.co.nz

mocka.co.nz I mocka.com.au

Table of Contents

Need help?

Do you have a question about the Eden Low Shelf and is the answer not in the manual?

Page 1 For the most up to date versions please refer to the product page on our website. mocka.com.au/mocka.co.nz mocka.co.nz I mocka.com.au...
Page 2 Eden Low Shelf Panel Layout Partlist Top Panel Shelf Panel mocka.co.nz I mocka.com.au...
Page 3 The ﬁxing device provided should ﬁt most wall types, but please note that different wall materials may require different ﬁxing devices from those supplied. Phillips screwdrivers required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au...
Page 4 Eden Low Shelf Hardware Needed Plate seam edge gap in the middle of the three plates are all in the same direction mocka.co.nz I mocka.com.au...
Page 5 Turn Over Hardware Needed wall anchor screw Note: Seek advice from a qualiﬁed trades person on how to attach this bracket to your speciﬁc wall. Once assembled lift furniture into place, do not drag. You’re done, enjoy! mocka.co.nz I mocka.com.au...