Advertisement
Quick Links
Edmond Entertainment Unit
Assembly Instructions
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A
B
C
dowel
screw
bolt
x8
x20
x12
I
J
K
long
plastic
screw
bolt
x8
glide
x4
x8
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
screw
bolt
locking
x24
x16
nut x12
L
M
N
Allen
hinge
adjuster
key
x1
x4
x1
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
wedge
bracket
x4
x8
O
P
shelf
bolt
x2
plug
x2
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Edmond Entertainment Unit
Summary of Contents for Mocka Edmond Entertainment Unit
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Edmond Entertainment Unit Assembly Instructions Panel Layout Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Insert 4x bolts (C) into panels [4] and [8] and tighten with a screwdriver. Attach panels [4] and [8] to panel [9] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Slide panels [5] and [6] down along the grooves between the panels [3], [4], and secure with 8x locking nuts (D). Tighten with a screwdriver. [7] and [8] to form the back of the unit as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 (K) to the ends of the legs [40] using a hammer as shown. Attach 1x support leg [41] to panels [10] and [2] as shown. Attach 1x adjuster (N) to mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 the ends of the legs [41] as shown.
- Page 6 Secure panels [11] and [12] to panels [3] and [8] by attaching the other Tighten with a screwdriver. end of the 4x hinges (M) with 16x screws (E). Tighten with a screwdriver. Insert 2x shelf plugs (O) into panel [2]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 2x washers (Z), 2x wall anchors (X) and 2x screws (Y). Ensure unit using 2x washers (Z) and 2x screws (W). Tighten with a screwdriver. is balanced and steady before use.You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 MOVE DOOR BACK OR holes loosen 2 screws in oval holes. Screw in 2 screws in Loosen this screw a bit. Re-tighten this screw. FORTH holes a bit. round holes mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Edmond Entertainment Unit and is the answer not in the manual?
Questions and answers