GE MDS entraNET Series Startup Manual page 11

• Press the
/
COM1 LAN
• At the
login
username). Press
• At the
Password
default password). Press
Starting Information Screen appears.
c. Review the current settings and make any necessary changes.
Typically, the parameters shown in
need to be set or reviewed. A complete list of AP commands appears
in the
MDS entraNET System Guide (05-4055A01)
Table 2. Key AP Parameters & Defaults
Menu Item
IP Address
IP Address
Mode
IP Netmask
05-4565A01, Rev. A
ENTER
key to receive the
LED flashes to indicate data communications.
prompt, enter the username (
ENTER
prompt, enter the password (
Management
System
Location
Main Menu >>
Network
Configuration >
IP Configuration
Main Menu >>
Network
Configuration >
IP Configuration
Main Menu >>
Network
Configuration >
IP Configuration
MDS entraNET Start-Up Guide
login
.
ENTER Upon successful log-in, the
.
Table 2 are the only settings that
Default
192.168.1.1
Static
255.255.0.0
prompt. The
is the default
admin
is the
admin
.
Values or Range
Contact your
Network
Administrator.
If IP Address Mode
(below) is set to
Dynamic, IP
Address is
configured
automatically.
Static | Dynamic
Settable per
customer
requirements
9