JVC GR-DLS1 Instructions Manual page 67

RM -V711U
(provided)
FAD E/ W IPE
EFFECT
ED IT IN / O U T
CAN CEL
8 REGISTER ADDITIO N AL SCEN ES
Repeat steps 4 – 7 (
• To change previously registered points, press
CAN CEL on the remote control. The
registered points disappear, one at a time,
from the most recently registered point.
• If you're not using Fade/Wipe or P .AE/Effects,
repeat steps 4 and 5 only.
PREPARE SO URCE TAPE
9
Rewind the tape in the camcorder to the
beginning of the scene you want to edit and
press the Pause button ( 6 ).
EN GAGE VCR'S RECO RD-PAUSE
10
M O DE
Point the remote control towards the VCR's
remote sensor and press VCR REC STBY , or
manually engage the VCR's Record-Pause
mode.
N O TES:
● Pressing R.A. ED IT O N / O FF on the remote control clears all settings registered during Random Assemble
Editing.
● When the editing cable is connected to the Pause terminal during dubbing, make sure the remote control
is pointed at the VCR's sensor, and that the path between the two is unobstructed.
● If, during Random Assemble Editing, you press any button on the camcorder, its Record-Standby mode is
automatically engaged.
● Random Assemble Editing may not function properly when using a tape including several duplicated Time
Codes. ( pg. 23).
Downloaded from:
Remote Sensor
T W
Power D ial
PAU SE
R.A. ED IT O N / O FF
VCR REC STBY
pg. 66).
https://www.usersmanualguide.com/
Stop button
START/ STO P button
IN
0 0 : 2 5 ~ 0 2 : 0 5
41 W
H
2 0 7 : 1 8 ~ 0 8 : 3 1 – –
P
3 – – 0 3 : 3 3 ~ 0 5 : 5 3
4 0 9 : 3 0 ~ 1 3 : 1 5
5 1 5 : 5 5 ~ 1 6 : 2 0 – – – –
6 – – – – : – – ~
7
8
TIME CODE
TOTAL
Random Assemble Editing menu
START EDITIN G
11
Press the START/ STO P button on the
camcorder. Editing proceeds as programed,
right through to the end of the last registered
scene.
• When dubbing is complete, the camcorder
enters the Pause mode, and the recorder
enters its Record-Standby mode.
• If you don't register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
12 STO P EDITIN G
Engage the Stop modes for the camcorder and
the VCR.
To make the R.A. Edit counter display disap-
pear, press R.A. ED IT O N / O FF on the remote
control.
67
EN
Rewind button
Pause button
OUT MODE
– –
P
B/W
~
~
1 6 : 3 0
9 : 3 9