Editing; Dubbing - JVC GR-DLS1 Instructions Manual

62
EN

Dubbing

You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR's instruction manual
for details.
Stop button
Lock button
Power D ial
M AKE CO N N ECTIO N S
1
Connect the camcorder to your VCR as shown
in the illustration on page 58.
Please also refer to your VCR's instruction
manual before dubbing.
START PLAYBACK
2
Press the Play button ( 4 ) to play back the
source tape.
3 START RECO RDIN G
While watching on the connected TV, engage
your VCR's record mode from the spot on the
source tape you want to begin recording.
PAUSE RECO RDIN G
4
Engage your VCR's pause mode to stop
recording a segment.
5 EN D RECO RDIN G
Press the Stop button ( 5 ) to stop the source
tape, and engage the VCR's stop mode.
Downloaded from:
Play button
O N / O FF button
https://www.usersmanualguide.com/
Remote sensor
RM -V711U
(provided)
N O TES:
● You can use Playback Zoom (
Playback Effects (
● Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do appear during dubbing, they are being
recorded onto the new tape.
To clear the Playback Sound Mode Display, press
D ISPLAY on the RM-V711U Remote Control.
● Select " DISPLAY" and " TIME CODE" from the
Playback Menu (
Date/Time and the Time Code on the recording.
● To show or hide all indications, press the
O N / O FF button on the camcorder for longer than
1 second.

EDITING

VCR
(Recording deck)
T W
D ISPLAY
PLAY
STO P
pg. 54) or
pg. 55) in step 2 .
pg. 56) to show or hide the