JVC GR-DLS1 Instructions Manual page 55

Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 5 effects.
PLAY BACK / EFFECT
4 OFF
1
2 B/W
3
4
5
1 START PLAYBACK
Press the Play button ( 4 ).
2 ACCESS P.AE/ EFFECT SELECT M EN U
Point the remote control at the camcorder's
remote sensor and press EFFECT . The P .AE/
EFFECT Select Menu appears.
SELECT P.AE/ EFFECT
3
Move the pointer and highlight bar to the
desired effect by pressing EFFECT . The selected
function is activated and after 2 seconds the
menu disappears.
Downloaded from:
Play button
P .AE/ EFFECT Select M enu
(Playback)
CLASSIC FILM
MONOTONE
SEPIA
STROBE
VIDEO ECHO
https://www.usersmanualguide.com/
RM -V711U
(provided)
T W
EFFECT
Lock button
Power D ial
N O TES:
● To deactivate the selected effect, press
O N / O FF on the remote control. Pressing it again
re-activates the selected effect.
● Repeat from step
selected effect.
● When a Playback Effect is activated, Pro Snapshot
modes ( pg. 31) are not possible.
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo . The effects work the same in playback as they
did in recording. Refer to page 45 for more
information.
EN
PLAY
EFFECT O N / O FF
Remote sensor
EFFECT
2 when you want to change the
55