Atlas Copco Power MACS Product Instructions

Control and drive unit

Download this manual

Printed Matter No. 9839 0183 00

Valid from Serial No. A0000001

2015-04-01

For Power MACS

Read all safety warnings and instructions

Failure to follow the safety warnings and in-

structions may result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for future

reference

WARNING

Power MACS

Product Instructions

Control and drive unit

Need help?

Do you have a question about the Power MACS and is the answer not in the manual?

Page 1 Printed Matter No. 9839 0183 00 Control and drive unit Valid from Serial No. A0000001 Product Instructions 2015-04-01 For Power MACS WARNING Read all safety warnings and instructions Failure to follow the safety warnings and in- structions may result in electric shock, fire and/ or serious injury.
Page 3 The E-stop module is an emergency stop solution with redundant breaking ac- cording to EN ISO 13849-1 category 3 PL d. The Atlas Copco Standard E-stop Cable 4222 1247 XX is used for connecting between the TC and the E-Stop module.
Page 4 E-stop Circuit 1 to 3 can be used for safety applications. NC and NO connectors are only for indication etc. For connection examples, see System Design & Installation Guide Power- MACS 4000. © Atlas Copco Industrial Technique AB - 9839 018300 00...
Page 5 Power MACS Product information Emergency stop 4222 0982 92 module © Atlas Copco Industrial Technique AB - 9839 018300 00...
Page 8 Original Product Information Atlas Copco Industrial © Copyright 2012, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This Technique AB applies in particular to trademarks, model denominations, part numbers and SE-10523 STOCKHOLM drawings.