Calendar Clock Display Modes - Oregon Scientific RMR-136HG User Manual

To turn the alarm off:
1. While the alarm is sounding, press [HI/LO].
2. Then press [ALARM ON/OFF].
3. The alarm has now been disabled and will not sound again until
reactivated.
To temporarily deactivate a sounding alarm:
1. Press any button and the alarm will be temporarily deactivated.
The alarm will sound again when a set limit is exceeded.
INTERRUPTED SIGNALS
If the display for a particular remote sensor goes blank on the main
unit LCD screen, press [CHANNEL] and [MEMORY] on the main
unit at the same time for about 2-seconds to trigger a signal search
between the main unit and the remote sensor.
If the search does not reactive the signal reception, verify:
1. The remote sensor is still in position.
2. The low battery warning icon is not displayed for the main unit or
the remote sensor. Replace batteries as necessary.
3. The remote sensor is within the effective transmission range of 21
to 32 yards from the main unit, and that the transmission path is
clear of obstacles and interference. Shorten the distance if
necessary.
NOTE: When the temperature falls below freezing point, the batteries
in the remote sensor will freeze lowering the voltage supply
and the effective range.
TRANSMISSION INTERFERENCE
Signals from household devices, such as door bells, home
security systems and entry controls, may interfere with those
of the RMR-136HG and result in temporarily reception
failure. This is normal and will not affect the general
performance of the product. The transmission and reception
of temperature and humidity data readings will resume once
the interference ends.
The success of wireless data transmission may vary and is
directly related to where the remote sensor is placed and the
environmental factors of that location. Should there be
difficulty in data transmissions, verify:
1. The low battery warning icon is not displayed for either the
main unit or the remote sensor. Replace batteries as
necessary.
2. The remote sensor is within the effective transmission range
of 21 - 32 yards from the main unit.
3. That there are no obstacle (like a transmission tower) or
environmental reason (such as a steep hill) that is causing
the interference or blockage between the main unit and the
remote sensor.
If the difficulty continues, reposition the remote sensor to a
different location and/or closer to the main unit.

CALENDAR CLOCK DISPLAY MODES

The RMR136HG has two different time display modes:
9