Oregon Scientific RMR-136HG User Manual page 2

A. THREE-LINE LCD DISPLAY
Easy-read LCD display of remote sensor and indoor
temperature-humidity data and calendar clock functions
B. [ ] BATTERY-LOW ICON
Indicates that the remote sensor or main unit battery power is
low and that batteries need replacement
C. [ ] US ATOMIC CLOCK SIGNAL RECEPTION ICON
Graphically displays the radio signal reception strength
D. [CHANNEL] BUTTON
Sequences through and displays indoor and remote sensor
channel data
E. [SET/MODE] BUTTON
Switches between display modes and saves user-selected
settings
F. [DAILY ((.))] BUTTON
Sets the time for the alarm
G. [MEMORY] BUTTON
- Displays the maximum or minimum temperature and humidity
readings
- Clears the stored maximum and minimum temperature and
humidity data from remote sensor and the main unit
H. [((•))] ALARM ICON
Indicates that the alarm time is displayed
I. [ ] ALARM-ON ICON
Is displayed when the alarm is activate
J. WALL-MOUNT RECESS
For mounting the unit on a wall
TEMPERATURE & RELATIVE HUMIDITY ALARM :
K. [ ] BUTTON
Sets the remote sensor alarm values of minimum and
maximum temperatures and humidity range
L. [HIGH/LOW] BUTTON
- Displays the maximum and minimum temperatures and
humidity remote sensor alarms
-Saves alarm settings
M. [ALARM ON/OFF] BUTTON
Activates or disables the remote sensor alarms
CLOCK :
N. [ ] BUTTON
Advances the value of a setting
O. [ALARM ON/OFF] BUTTON
Activates or disables the clock alarm
P. [ ZONE ] BUTTON
Selects the US time zone
Q. [RESET] BUTTON
Returns all settings to their original default values
R. BATTERY COMPARTMENT
Accommodates two AA (UM-3) size batteries (included)
S. REMOVABLE TABLE STAND
For standing the main unit on a flat surface
2