Regular Maintenance; Troubleshooting - Foster Slimline FSL400H User Manual

Table of Contents

Advertisement

Regular Maintenance

Where the regular cleaning regime previously
described does not remove dirt or grease
deposits from the condenser, it should be
cleaned by a competent engineer. We
recommend that an engineer services the
appliance every 6 to 12 months to maintain
6-12 MONTHS
your warranty and ensure optimal performance
of your appliance. We recommend that service
is carried out by an authorised Foster agent or
by contacting the Foster Service team using the
contact details in this manual.

Troubleshooting

Alarms/Warnings:
During operation the current temperature inside the appliance will be
displayed. At certain times this will change to indicate a particular appliance
operation or fault. The indicators you may see are as follows:
dEF - Defrost in progress. This is normal and your appliance will carry out a defrost periodically through each
24 hours. The contents of the appliance will be unaffected by this operation.
oFF - The appliance is switched off in standby. Turn the appliance back on to resume temperature control.
dO - The door is detected as being open. Ensure that the door is closed and that there are no obstructions
which may be preventing the door from fully closing.
hi - The internal temperature of the appliance is higher than it should be. Ensure that the door is closed and
that the air flow inside is not obstructed by excesive or poor loading of product. The alarm will reset if the
temperature falls to a normal level. If this does not happen please contact your authorised dealer or Foster
Service.
E1 - This indicates that the internal temperature probe has failed. Call your authorised dealer or Foster Service
to arrange for this to be replaced. During this time the appliance cannot maintain an accurate temperature
and all product should be removed and the appliance switched off.
E2 - This indicates that the evaporator probe has failed. Call your authorised dealer of Foster Service to
arrange for this to be replaced.
(Some indications are only visible periodically during specific appliance operations such as defrost or when activated
through use of the appliance).
Slimline - User Manual
15

Advertisement

Table of Contents
loading

Table of Contents