Alarm And Snooze Function - Oregon Scientific BAR898HGA User Manual

appropriate month using the UP [
Press [MODE] button and the day settings will flash. Enter the
appropriate day using the UP [
Press [MODE] again and the language setting will flash. Use the
UP [ ] or DOWN [ ] button to select E for English, F for
French or S for Spanish.
Press [MODE] to complete and exit the setting.
The weekday can be expressed as an abbreviation in three different
languages. The languages and their selected abbreviations for
each day of the week are shown in the language chart below.
Language
Monday Tuesday
English
French
Spanish
To toggle among the 4 U.S. time-zones, press the [ZONE] button.
HOW TO SET AND ACTIVATE THE ALARM
To set the Alarm
Press [ALARM] button to display the daily alarm time (the icon
" " will be displayed)
Press [ALARM] and hold for three seconds, the value for the
hour will flash.
] or DOWN [ ] button.
] or DOWN [ ] button.
Day-of-the-week
Wed. Thursday Friday Saturday
Press UP [ ] or DOWN [
alarm hour setting.
Press [ALARM] and the minute digits will flash. Enter the value
for the minute by using UP [
Press [ALARM] to exit.
The alarm is automatically activated. The ALARM ON icon [
] is visible and the alarm will be activated at the specified time.
To deactivate the daily alarm function, press the [ALARM]
button when the alarm time is displayed. The ALARM ON icon
will disappear.
To activate, press the [ALARM] button again.
Sunday

ALARM AND SNOOZE FUNCTION

When the daily alarm goes off, the backlight will be on for five
seconds and the ALARM ON icon [
The alarm function has a built in crescendo type alarm system.
Initially, the active alarm will have a gentle sound. The intensity
will increase in three stages. Without interruption, the unit will
alarm for two minutes.
To stop the alarm, press the [ALARM] button. However, if
[ SNOOZE / LIGHT ] is pressed, the snooze function will be
triggered. The alarm will stop and the ((.)) icon blinks for eight
minutes. After that the alarm will go off again.
To deactivate the snooze function, press the [ALARM] button.
8
] buttons to make changes to the
] or DOWN [ ] buttons.
] will flash.