To Manually Set Calendar Clock; Alarm And Snooze Function; Indoor/Outdoor Temperatures; How To Set The Alarm - Oregon Scientific BAR338PA User Manual

The [ZONE] button is located inside the battery compartment.
Press [ZONE] button to select among the 4 US time-zones: Pacific,
Mountains, Central or Eastern.
HOW TO MANUALLY SET THE

CALENDAR CLOCK

When travelling outside of the US Atomic Clock signal reception
range, the BAR338PA can be manually set to operate as a quartz
clock. Note that setting the clock manually will disable the signal
reception and synchronization function. To set the clock manually:
1. Press and hold [CLOCK] for two seconds.
2. Enter the hour using the [
button to rapidly increase or decrease the value.
3. Press [CLOCK].
4. Enter the minute using the [
5. Press [CLOCK].
6. Follow the same procedure to set the year, month, day and
display language. For the display language, you can choose
English, French or Spanish.

HOW TO SET THE ALARM

1. Press and hold [ALARM] for two seconds.
2. Enter the hour using the [
3. Press [ALARM].
] or [ ] buttons. Hold down either
] or [ ] buttons.
] or [ ] buttons.
4. Enter the minutes using the [
5. Press [ALARM].
The alarm is automatically activated after the setting procedure. To
deactivate it, press [ALARM] to turn off the [
the alarm time is displayed.

ALARM AND SNOOZE FUNCTION

When the alarm is activated, it will go off at the set time. The display
will light up for five seconds and the [
The crescendo function allows the alarm to start off gently and with
its intensity in four steps. Without interruption, the alarm will
sound for a minute.
To stop the alarm, press [ALARM]. If the [SNOOZE/LIGHT]
button is pressed, the SNOOZE function will be triggered. The
alarm will stop for eight minutes before going off again.
INDOOR AND OUTDOOR
TEMPERATURES
Press [IN/OUT] to toggle between indoor temperature and outdoor
temperature.
Press [°C/°F] to display the temperature in Centigrade °C or
Fahrenheit °F.
7
] or [ ] buttons.
] indicator when
] icon will flash.