Progra M M Ing Guide Line S - TeeJet 814 Programming And Operating Manual

Progra m m ing Guide line s

Make sure that all hardware components are properly installed and tested. Before you start
the programming process you should first check if the Console and all sensors are working
properly.
Important Preliminary Information
Before you begin, we recommend that you review the following Programming Guidelines that
control the programming process:
*
The Pro key is used for power ON
*
Clr + Up + Down key combination is used to power OFF (when not spraying)
*
Holding Pro key for 3 seconds is used to enter or exit the programming mode
*
Shortly pressing the Pro key saves the current parameter and advances to the next
programming step
*
Shortly pressing the Clr key restores the parameter with the default value
*
Holding the Clr key restores the parameter with its minimum value (mostly zero)
*
The value of a parameter is changed with the Up and Down keys. Holding the Up or
Down key changes the parameter rapidly.
TeeJet 814 Sprayer Monitor Programming and Operating Manual (V1.00) Page 3 of 15