Aut Om A T Ic Pow E R Dow N - TeeJet 814 Programming And Operating Manual

♦ total volume applied in Gal (L)
*
Adjust the pressure and target dose rate with the +/- switch.
As you enter the field to the point where you will begin spraying, turn the Master switch to "ON"
position. This will activate the spraying operation. Maintain your usual vehicle speed for
spraying. Use the +/- key to maintain the application rate.
If for any reason you need to stop, turn the MASTER SWITCH to "OFF."

Aut om a t ic Pow e r Dow n

The TeeJet 814 Sprayer Monitor has an automatic power down feature. With the Master
switch in the "OFF" position, the Console will automatically shut down after 10 minutes of no
inputs (when in normal monitor mode). This prevents possible battery drainage.
You can also power down the controller by the following key combination: press
simultaneously the Clr, Up and Down keys and the Console will power down immediately (only
with Main valve switch OFF).
W : D !
ARNING O NOT SWITCH OFF THE CONSOLE BY REMOVING THE MAIN CABLE
TeeJet 814 Sprayer Monitor Programming and Operating Manual (V1.00) Page 13 of 15