Table of Contents
Advertisement
40
EN
G-C
O DE
Progra m m ing
● Before G-C
Timer programming, see "G-C
ODE
on page 16.
● Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
N U M BER
CAN CEL
M EN U
When Using The Illumi-Guide Feature
● Buttons light or blink on the remote control for
approximately 10 seconds. If the button or buttons extinguish
during timer programming, press ILLUMI GUIDE and the
button or buttons previously lit or blinking come back on. If
the button or buttons do not re-light or start blinking again,
press M EN U as many times as necessary to return to the
normal screen and extinguish all illuminated buttons,
and re-perform the timer programming procedure from the
beginning.
● If for some reason the remote control's signal is not received
by the VCR, press M EN U as many times as necessary to
return to the normal screen and extinguish all
illuminated buttons, and re-perform the timer programming
procedure from the beginning.
Downloaded from:
https://www.usersmanualguide.com/
Timer
ODE
q
1
2
3
4
5
6
7
8
9
0
TV/ CABLE/ VCR
O K
ILLU M I GU ID E
Timer recording allows you to program the VCR to automati-
cally record a program which will be broadcast at some future
time.
The timer record function can be programmed using G-CODE
or On-Screen Timer Programming. (
During G-C
ODE
feature tells you which button on the remote control must be
pressed next by lighting the relevant buttons. The Illumi-Guide
feature is activated by the ILLU M I GU ID E button on the remote
control. The Illumi-Guide feature is only active when the
Setup"
remote control's TV/ CABLE/ VCR switch is set to "VCR". (Illumi-
Guide is an optional help feature which makes programming
easier. It is not necessary to use Illumi-Guide to program the
VCR.)
LO AD A CASSETTE
Make sure the record safety tab is present.
1
● The VCR's power comes on automatically.
ACCESS G-CO DE SCREEN
To use the Illumi-Guide
2
feature press ILLU M I
GU ID E . The M EN U , REW ,
PLAY and FF buttons will
light.
Press M EN U on the remote
control.
● The clock must be set in
order to access the G-
C
ODE
Menu screen appears when you press M EN U . Refer
to page 5 for the Plug & Play procedure or page 7 for
the clock setting procedure.
● If you are using the Illumi-Guide feature,
when the following buttons are lit: N U M BER keys (0 –
9), PU SH JO G , CAN CEL and M EN U .
EN TER G-CO DE N UMBER
Press the appropriate N U M BER keys to enter the G-
3
C
ODE
program you wish to record.
● To make corrections, press
correct G-C
● If the G-C
"ERROR" may appear on the screen to advise you of
the error. This happens when the G-C
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the G-C
reappears (step 2 ).
● If you are using the Illumi-Guide feature,
when the following buttons are lit: N U M BER keys
(0 – 9), PU SH JO G , CAN CEL and M EN U .
TIM ER RECO RD IN G
pg. 40 or 42)
and on-screen programming, the Illumi-Guide
PRESS NUMBER KEY (0-9)
PRESS (MENU) TO MAIN MENU
screen. If you haven't set the clock, the Main
number printed in the TV listings for the TV
CAN CEL and input the
number.
ODE
number you input is incorrect,
ODE
G-CODE
O K blinks
number is
ODE
screen
ODE
O K blinks
Advertisement
Table of Contents
