Powerfix Profi Z16531 Operation And Safety Notes page 2
Hand-held stapler set
Hide thumbs
Also See for Z16531:
- Operating and safety notes (24 pages) ,
- Operation and safety notes (25 pages) ,
- Operation and safety notes (20 pages)
Advertisement
Available languages
Available languages
GB
Operation and Safety Notes
PL
Wskazówki dotyczące obsługi i bezpieczeństwa
HU
Kezelési és biztonsági utalások
SI
Navodila za upravljanje in varnostna opozorila
CZ
Pokyny pro obsluhu a bezpečnostní pokyny
SK
Pokyny pre obsluhu a bezpečnostné pokyny
DE / AT / CH
Bedienungs- und Sicherheitshinweise
Page
5
Strona
8
Oldal
11
Stran
14
Strana
17
Strana
20
Seite
23
Advertisement
Need help?
Do you have a question about the Z16531 and is the answer not in the manual?
Questions and answers
Model no:Z16531 stapler instruction
The instructions for the Powerfix Profi model Z16531 stapler include:
1. Proper Use: The stapler is designed only for stapling lightweight materials like cardboard, leather, and cloth onto hardwood, softwood, chipboard, or plywood.
2. Staple Types:
- Round crown staples: 10–12 mm length, 6.2–6.5 mm width, 1.1–1.3 mm thickness.
- T-nails: 10–14 mm length, 1.6–2 mm width, 1.1–1.3 mm thickness.
3. Stapling Procedure:
- Press the staple eject opening on the desired spot.
- Adjust the impact force based on materials and staples.
- Firmly press the operating lever.
4. Removing Jammed Staples:
- Slightly press and pull down the staple pusher to remove it.
- Turn the stapler so the magazine faces up.
- Press the side wings of the magazine and pull it upward.
- Remove jammed staples.
- Reinsert the magazine by pressing the wings and pushing it down until it locks.
5. Safety:
- Never place hands near the gun or workpiece surface.
- Do not use the stapler if damaged.
- Repairs should use only original spare parts.
6. Cleaning and Care:
- Keep it clean, dry, and free from oil.
- Clean with a slightly damp, lint-free cloth.
7. Disposal:
- Packaging is recyclable.
- Dispose of old units through local recycling services.
This answer is automatically generated