Temperature And Humidity; Temperature, Humidity And Pressure Trend; Ice Warning; Hi / Lo Temperature /Humidity Alarms - Oregon Scientific BAR688HG User Manual

TEMPERATURE AND HUMIDITY

To toggle temperature unit:
Press °C / °F.
To view outdoor sensors temperature readings:
Press CHANNEL.
To auto-scan between sensors:
Press and hold CHANNEL for 2 seconds.
Each sensor's data is displayed for 3 seconds.
To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.

TEMPERATURE, HUMIDITY AND PRESSURE TREND

The temperature, humidity and pressure trend icons are
based on recent sensor readings.
RISING
BAR688HGA_EN_REV3
STEADY FALLING
8

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.

HI / LO TEMPERATURE /HUMIDITY ALARMS

Temperature and humidity alerts can be set to sound
if sensor set to channel 1 records above or below a
temperature/humidity of your choice.
To set alarm ON / OFF:
1. Press and hold TEMP / HUMIDITY HI / LO
2. Use and to select high / low temperature /
humidity alarm. Press TEMP / HUMIDITY HI / LO
to confirm.
3. Press / to set alarm ON / OFF and press TEMP
/ HUMIDITY HI / LO
4. If alarm has been activated, use
the temperature / humidity.
5. Press TEMP / HUMIDITY HI / LO
To silence the hi / lo alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is recorded again.

HEAT INDEX

The heat index combines temperature and humidity data
to describe the actual temperature felt.
8
2006.3.13, 6:35 PM
.
to confirm.
and to select
to confirm.