Low Battery Warning; How To Use The Table Stand Or Wall Mounting; The Reset Button; Getting Started - Oregon Scientific BAR122HGLA User Manual

LOW BATTERY WARNING

When it is time to replace batteries, the low-battery indicator will
be displayed for the selected channel.
HOW TO USE THE TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand which when connected
can support the unit on a flat surface. Or you can remove the stand
and mount the unit on a wall using the recessed screw hole.
The remote sensor comes with a wall mount holder and a table stand.
Main unit
Wall-mount Table Stand
b122hga-e.p65
Remote unit
Wall-mount

THE RESET BUTTON

This button is used when the unit is operating in an unfavorable
way or malfunctioning. To return all user programmed settings to
their original factory values, press [ RESET ] by using a blunt
stylus to hold down the button.
Once batteries are placed in a given remote sensor unit, it will start
transmitting information at 40-second intervals.
For approximately a 3-minute duration, the main unit will
automatically search for signals once batteries are installed. Upon
successful reception, the individual channel temperature reading
will be displayed on the second line and the respective humidity
reading on the third line. The main unit will automatically update
its readings at about 40-second intervals.
5
5
Table Stand

GETTING STARTED

08/10/2001, 12:17 PM