Table of Contents
Advertisement
DIGITAL WEATHER FORECASTER
MAIN FEATURES: MAIN UNIT
WITH REMOTE THERMO-HYGRO
SENSOR AND RADIO CONTROLLED
CLOCK
MODEL NO.: BAR112HG
USER'S MANUAL
INTRODUCTION
Congratulations on your purchase of the Weather forecaster with
cable free sensor and radio-controlled calendar clock (BAR112HG).
A multifunction device, this unit has a large four-line liquid crystal
display (LCD) for displaying weather forecast information, in/
outdoor temperatures, relative humidity, a radio frequency (RF)
controlled calendar clock, time zone adjusted time, and dual daily
alarms. Also, the main unit can support up to three remote sensors.
Other features include a day-of-the-week display in four abbreviated
languages, a four-step crescendo alarm, and interchangeable clock
display modes.
1
Advertisement
Table of Contents
Related Manuals for Oregon Scientific BAR112HG
Summary of Contents for Oregon Scientific BAR112HG
- Page 1 USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock (BAR112HG). A multifunction device, this unit has a large four-line liquid crystal display (LCD) for displaying weather forecast information, in/ outdoor temperatures, relative humidity, a radio frequency (RF) controlled calendar clock, time zone adjusted time, and dual daily alarms.
- Page 2 A . FRONT DISPLAY WALL-MOUNT HOLE A four line easy-to-read LCD each with specific purposes that For mounting the unit on a wall relate to weather forecasting, temperature, relative humidity, or TEMPERATURE & RELATIVE HUMIDITY ALARM : clock / calendar / alarm functions. A1.
-
Page 3: Features: Remote Thermo-Hygro Sensor
TWO-LINE LCD FEATURES: REMOTE THERMO-HYGRO Displays the current temperature and humidity monitored by SENSOR the remote unit LED INDICATOR Flashes when the remote unit transmits a reading °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) CHANNEL SLIDE SWITCH Designates the remote unit Channel 1, Channel 2 or Channel RESET Returns all settings to default values... -
Page 4: Battery And Channel Installation: Remote Unit
easier synchronization between the transmission and reception BATTERY AND CHANNEL INSTALLATION: of signals. REMOTE UNIT 4. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 20 to 30 The remote thermo-hygro sensor unit uses two (2) UM-4 or “AAA” meters. -
Page 5: Low Battery Warning
Remote unit LOW BATTERY WARNING Wall-mount Table Stand When it is time to replace batteries, the respective low-battery indicator will show up when the respective channel is selected. The battery level of the main unit will be shown on the indoor temperature when it is running low. -
Page 6: How To Check Remote And Indoor Temperature & Humidity
If no signals are received, blanks “---” will be displayed and the To display temperature / humidity readings from a remote kinetic wave icon will not show. sensor: To force a signal search: • Press [CHANNEL] until the appropriate remote sensor channel is displayed in the box under the kinetic-wave. -
Page 7: The Comfort-Level Icons
THE COMFORT-LEVEL ICONS Arrow indicator The comfort level is based on the recorded relative humidity. An indicator will be displayed or show if the level is comfortable, wet Steady Falling Pressure Trend Rising or dry. Note: If the temperature goes above or below the temperature Comfort-level measuring range of the main unit or the remote unit ( stated in Comfort... -
Page 8: How To Use Channel-1 Temperature/ Humidity Alarm
To display the maximum and minimum display memory: To set a high or low temperature or humidity alarm: 1. Select the channel to be checked. 1. Press [HI/LO], channel-1 will be displayed. 2. Press [MEM] once to display the maximum temperature humidity 2. -
Page 9: Disconnected Signals
been surpassed. TRANSMISSION COLLISION To disable an alarm: Signals from other household devices, such as door bells, home 1. Enter the setting mode by pressing [HI/LO]. security systems and entry controls, may interfere with those of this 2. Then, press [AL ON/OFF]. product and cause temporarily reception failure. -
Page 10: Calendar Clock Display Modes
CALENDAR CLOCK DISPLAY MODES ABOUT RADIO RECEPTION The BAR112HG is designed to automatically synchronize its The BAR112HG supports four time display modes in the sequence calendar clock once it is brought within range of the Frankfurt DCF77 radio signal. MODE 1. Hour-Minute-Second (of local time) -
Page 11: How To Set The Clock Manually
To enable the feature again, press the [ ] button for three seconds. The BAR112HG has two alarms, ALARM 1 and ALARM 2. They The radio reception signal [ ] will start blinking to initiate can be invoked together or independently. -
Page 12: Specifications
HOW TO STOP AN ALARM MAINTENANCE To stop an alarm, you can use either press [ ] button or [AL ON/ When handled properly, this unit is engineered to give you years OFF] button. of satisfactory service. Here are a few product care instructions: Pressing [ ] will stop the alarm, which is still armed and will 1. -
Page 13: Note On Compliance
Temperature resolution : 0.1°C (0.2°F) and article number 334 of PTT. Relative Humidity Operating : 25% RH to 90% RH Warning: Changes or modifications to this unit not expressly range approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Page 14 CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using this product.