Summary of Contents for Oregon Scientific BAR122HGLA
Page 1
CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The contents of this manual may not be reproduced without the permission of the manufacturer.
Consult the dealer of an experienced radio/TV technician for help. Company Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA Telephone Number: 1-800-853-8883 Name and model number of the product: Remote Thermo-Hygro...
HOW TO STOP AN ALARM To stop an alarm, you can use either press [ ] button or [ AL ] button. Pressing [ ] will stop the alarm, which is still armed and will activate at the set time the following day. If [ AL ] button is pressed instead, the alarm will be stopped and deactivated all together.
The radio reception signal [ ] and the outline of the US-Map icon will start blinking to initiate reception automatically. - Strong - Weak - No signal - Receiving HOW TO SET THE CLOCK MANUALLY To set the clock manually, hold [MODE/SET] for three seconds. The hour digits will blink.
WEATHER FORECAST FUNCTION The unit is capable of detecting atmospheric pressure changes. Based on collected data, it can predict the weather for the forthcoming 12 to 24 hours. The effective range covers an area of 18 to 30 miles. Indicator displays on the unit Forecast...
Page 6
The high-low displays are as follows: Sequence Respective Display Pressing HI/LO once Enters HI temperature display Pressing HI/LO twice Enters HI humidity display Pressing HI/LO third time Enters LO temperature display Pressing HI/LO fourth time Enters LO humidity display To set a high or low temperature or humidity alarm: 1.
HOW TO READ THE KINETIC WAVE DISPLAY The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms: The unit is in searching mode. Transmission data are securely registered. No signal received in search mode. REMOTE SENSOR SCANNING The unit can be set to automatically scan and display readings from the remote sensors and indoor readings.
If no signals are received, blanks “---” will be displayed and the kinetic wave icon will not show. To force a signal search: • Press and hold [CHANNEL] & [MEMORY] for 2 seconds to enforce a 3-minute search. This is useful in synchronizing the transmission and reception of the remote and main units.
LOW BATTERY WARNING When it is time to replace batteries, the low-battery indicator will be displayed for the selected channel. HOW TO USE THE TABLE STAND OR WALL MOUNTING The main unit has a removable table stand which when connected can support the unit on a flat surface.
easier synchronization between the transmission and reception of signals. 4. Position the remote sensor and main unit within effective transmission range, which, in usual circumstances, range of 300 feet (100 meters) under ideal conditions. Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned.
FEATURES: REMOTE THERMO-HYGRO SENSOR b122hga-e.p65 TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit LED INDICATOR Flashes when the remote sensor transmits a reading °C/°F SLIDE SWITCH Selects between Centigrade (°C) and Fahrenheit (°F) CHANNEL SLIDE SWITCH Select the remote sensor Channel 1, Channel 2 or Channel 3 RESET Returns all user programmed settings to original factory set...
Page 13
A . FRONT DISPLAY A four line easy-to-read LCD A1. WEATHER FORECAST WINDOW Graphically illustrates a weather forecast B. [ ] BATTERY-LOW INDICATOR Activates when the remote-sensor or main unit battery power is low C. [ ] RADIO-RECEPTION SIGNAL Indicates the condition of radio reception D.
DIGITAL WEATHER FORECASTER MAIN FEATURES: MAIN UNIT WITH REMOTE THERMO-HYGRO SENSOR AND RADIO CONTROLLED CLOCK MODEL NO.: BAR122HGA USER’S MANUAL INTRODUCTION Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock BAR122HGA. This unit has a large four-line liquid crystal display (LCD) for displaying weather forecast information, in/outdoor temperatures and relative humidity, radio frequency (RF) controlled calendar clock and daily alarm.