Nuts And Bolts - Stiga MP 84 Series Operator's Manual

IMPORTANT In order not to compromise
- do not let the clutch come into contact with oil;
- do not spray pressurised water
directly on the clutch unit;
- do not clean the clutch with petrol.
b. Cleaning the exterior
Do not let debris and dried grass
accumulate in the upper part of the
cutting-means assembly in order
to maintain maximum machine
To clean the upper part of the
•
•
7.6
•
•
•
must be recharged as soon as possible.
IMPORTANT Recharging must be
done using a battery charger at constant
voltage. Other recharging systems can
irreversibly damage the battery.
•
the corresponding connector for the special
IMPORTANT
This connector must
only be used for connection to the
maintenance battery-charger indicated
by the Manufacturer. For its use:
follow the instructions given in the
relative instructions manual;
follow the instructions in the battery manual;
7.7

NUTS AND BOLTS

•
8.
8.1
You must go to a specialized
Service Centre or contact your Dealer
if the following are malfunctioning:
- the brake
- the cutting means engage
and disengage functions
- switching the drive to forward
or reverse gears.
8.2
8.2.1 Aligning the cutting-means assembly
8.2.2 Cutting means
All work on the cutting means
are demanding jobs that require special
skills as well as special tools. For
carried out at a Specialised Centre.
(if
or worn cutting means are replaced
screws in place to preserve balance.
IMPORTANT
be replaced in pairs, especially when
EN - 18
Cutting means should