Preparation - Stiga MP 84 Series Operator's Manual

6.1 PREPARATION

6.1.1
IMPORTANT The machine is
supplied without engine oil or fuel.
6.1.2
To change the seat position, loosen the four
6.1.3 Tyre pressure
1.
2.
3. Adjust the pressure according to the values
6.1.4 Preparing the machine
before starting work
NOTE This machine can be used to
before starting work, prepare the machine
based on how the lawn is to be mowed.
a. Prepare the machine for side cutting and
b. Preparation for grass cutting and
collection in the grass catcher (for
For refuelling
EN - 11
of the grass catcher opening is
c. Prepare the machine for rear cutting and
This has to be attached to the rear
plate as indicated in the instructions.
d. Preparation for mowing and
mulching of grass
plate as indicated in the instructions.
6.1.5 Positioning the anti-scalp wheels
6.2
those outlined on the tables.
Always carry out the safety
checks before use.
6.2.1 General safety check
Rear discharge guard,
grass catcher
Side discharge
guard, suction grid
Fuel lines and
connections.
Electrical cables.
Oil lines
Result
Good condition. No
installed.
Good condition. No
installed.
All insulation intact.