Stiga MP 84 Series Operator's Manual page 240

IMPORTANT
cutting means bearing the code
indicated in the "Technical Data".
8.3
8.3.1 Preparation
IMPORTANT Use a suitable lifting
device, for example a scissor jack.
•
•
and even surface that guarantees
•
•
•
•
•
perpendicular to the ground.
8.3.2 Choice and positioning of the
•
•
•
•
NOTE In this position the jack allows you
to only raise the wheel to be changed.
8.3.3 Choice and positioning of the
1.
2.
3.
NOTE The wooden wedge prevents
damage to the front axle.
4.
rests against the chassis and
NOTE During this phase use your hand to
keep the wedge balanced correctly on the jack.
NOTE In this position the jack allows
you to raise the entire front axle.
8.3.4 Changing the wheel
IMPORTANT Make certain the machine
remains still and stable during the lifting process.
If you notice anything out of the ordinary,
lower the jack immediately, check and resolve
any problems and lift the machine again.
1.
2.
3.
4.
5.
6.
7.
IMPORTANT Check that the two rear wheels
mowing, the cutting-means assembly must
be aligned by an authorised service centre.
8.3.5 Repairing or changing tyres
EN - 19