Advertisement
CONTENTS
Prior first use
Control Panel
Baking in the oven
Cleaning and maintenance
Troubleshooting
Technical information
2
SAFETY INSTRUCTIONS
Mains lead of adjacent appliances may be damaged by hobs or stuck between the
oven doors, and produce short circuit, therefore keep them at safe distance from the
3
appliance.
4
Never put pans weighing over 15kg on the opened door of the oven.
4
Do not use the oven in the event of a technical fault. If a technical fault occurs,
4
disconnect the power and report the fault to the service centre for repair.
Never clean the oven with the high-pressure steam cleaning device, as it may cause
5
short a circuit.
6
Do not use harsh abrasive cleaners, scourers or sharp metal scrapers to clean the
9
door glass as they can scratch the surface which may result in glass shattering.
9
The rules and provisions contained in this instruction manual should be strictly
9
observed. Do not allow anybody who is not familiar with the contents of this
instruction manual to operate the oven.
17
If the supply cord is damaged, it must be replaced by the manufacturer, its service
23
agent or similarly qualified persons in order to avoid a hazard.
25
The appliance is not intended for use by persons (including children) with reduced
26
physical, sensory or mental capabilities, or lack experience and knowledge, unless
they have been given supervision for their safety.
WARNING: Ensure that the appliance is switched off before replacing the lamp to
avoid the possibility of ELECTRIC shock.
Only use the temperature sensing probe recommended for use with this oven.
When the input voltage exceeds 270V, the oven will automatically shutdown. The
user will need to manually restart the oven.
During unpacking, the packaging materials (polythene bags, polystyrene pieces, etc.)
should be kept out of reach of children.
Do not place aluminium foil, dishes or trays, water or ice on the oven floor during
cooking, as going so will irreversibly damage the enamel. Lining the oven with
aluminium foil may even cause fire.
During use the appliance becomes hot. Care should be taken to avoid touching
heating elements inside the oven.
Warning: Accessible parts may become hot during use. Young children should be
kept away.
Excess spillage must be removed before cleaning.
Specify which utensils can be left in the oven during cleaning.
Under pyrolytic self-cleansuch mode the surfaces may be get hotter than usual,
children should be kept away.
The appliance must not be installed behind a decorative door in order to avoid
overheating.
Children should be supervised to ensure that they do not play with the appliance.
The fixed wiring installation must be incorporated with an all poles disconnection
device in accordance with the wiring rules that provide full disconnection under
overvoltage catefory III conditions.
3
Advertisement
