The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website listed on the cover or contact your local Haier dealer.
PRODUCT DIMENSIONS FRONT SIDE Product Dimensions Overall height* of product Overall width of product overall depth of product (excluding handle and knobs) Height of chassis Width of chassis Depth of chassis Depth of oven frame and control panel (=distance between front of chassis and front of oven door, excl. knobs) depth of oven door when fully open Electrical supply 16-20 mm...
CABINETRY DIMENSIONS Electrical supply 16-20 mm min. 2.5 mm SIDE Cabinetry Dimensions Minimum inside width of cavity Overall width of cavity Inside height of cavity Overall height of cavity Minimum inside depth of cavity Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer’s instructions.
PRIOR TO INSTALLATION Before you install the oven, make sure that the benchtop and oven cavity are square and level, and are the required dimensions ● ● the installation will comply with all clearance requirements and applicable standards and regulations ●...
Page 6
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing 230-240 V~ 2350-2550W ● ● difficult. Haier will not cover the costs of removing the oven, or of damage caused by 230-240 V~ 3095-3370W this removal. Model code...
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Make sure the oven is level and securely fitted to the cabinetry and the oven door opens and closes freely. Make sure all the internal packaging has been removed from the oven cavity. Make sure all oven vents and openings are clear and are free of any obstruction/damage.
Need help?
Do you have a question about the HWO60S4 and is the answer not in the manual?
Questions and answers