SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
Ensure that the inverter ground cable is securely connected. Otherwise, the built-in PID repair
function will be affected and electric shocks may occur.
Procedure
Step 1 On the home screen, choose Settings > Feature Parameters and set related parameters.
Figure C-1 Setting PID suppression parameters
----End
Issue 01 (2022-07-29)
C
Set PID running mode to Repair (disabled by default).
Set Nighttime off-grid repair to
mode is set to Repair).
Copyright © Huawei Technologies Co., Ltd.
Built-in PID Recovery
(this parameter is displayed when Built-in PID running
C Built-in PID Recovery
89