SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
Figure 4-12 Expansion bolt composition
(1) Bolt
(4) Flat washer
To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-dust mask
when drilling holes.
Clean up any dust in and around the holes using a vacuum cleaner and measure the
distance between holes. If the holes are inaccurately positioned, drill holes again.
Level the front of the expansion sleeve with the concrete wall after removing the bolt,
spring washer, and flat washer. Otherwise, the mounting bracket will not be securely
installed on the concrete wall.
Figure 4-13 Installing expansion bolts
----End
Issue 01 (2022-07-29)
(2) Nut
(5) Expansion sleeve
Copyright © Huawei Technologies Co., Ltd.
4 Installation
(3) Spring washer
25