SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
Avoid scratching the core wire when stripping a cable.
The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.
Wrap the wire crimping area with heat shrink tubing or PVC insulation tape. The heat
shrink tubing is used as an example.
When using a heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(1) Cable
(4) OT terminal
Step 2 Connect the PE cable.
Issue 01 (2022-07-29)
(2) Core
(5) Crimping tool
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Heat shrink tubing
(6) Heat gun
32