Operating Instructions • Warning Information
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
SPECIFICATIONS
Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20,000 RPM
Horse Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7
Cut Off Wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3"
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT
Minimum Hose Size. . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" I.D.
Maximum Air Pressure . . . . . . . . . . . . . . . . . . 90 psig, 6.2 bar
Average Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . 4 CFM
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 Lbs
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 dBA
Vibration Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 m/s²
CAT900HD
• Parts Breakdown
WARNING
WARNING
• MaxiMuM RPM of 20,000
• Max. aiR PRESSuRE:
90 PSIg, 6.2 BAR
• uSE REcoMMEndEd GuaRd
ALWAYS ReAD
INSTRuCTIONS BeFORe
uSINg POWeR TOOLS
ALWAYS WeAR
SAFeTY gOggLeS
WeAR HeARINg
PROTeCTION
AVOID PROLONgeD
exPOSuRe TO VIBRATION
RATeD RPM OF THe
ACCeSSORY MuST
RPM
RPM
RPM
exCeeD THe MAxIMuM
TOOL RPM SHOWN
CAT900HD
3" Reversing
Cut Off Tool
Copyright © Professional Tool Products, 2014
All rights reserved
7/30/14
Need help?
Do you have a question about the CAT900HD and is the answer not in the manual?
Questions and answers