Pairing A Bluetooth Device - ION TOTAL PA ULTIMATE User Manual

Pairing a Bluetooth Device

1. Power on the Total PA™ Ultimate by flipping the power switch on/o .
2. When the unit is first turned on, it will automatically enter Bluetooth pairing mode. If
necessary, press the Source button to select Bluetooth mode. If voice prompts are enabled,
you will hear "Bluetooth Pairing."
3. Navigate to your device's Bluetooth setup screen, find Total PA Ultimate, and connect. Do
not connect to iPA161_BLE; this is reserved exclusively for connecting to the ION Sound
Control™ app. When connected, the Bluetooth icon on the display will flash and you will
hear "Bluetooth Connected".
Note: If you experience trouble in connecting, select "Forget this Device" on your Bluetooth
device and try to connect again.
4. To disconnect, turn o Bluetooth from your device's Bluetooth settings.
ION Audio Total PA™ Ultimate User Guide
1 - PRESS
TOTAL PA ULTIMATE
TM
2
11