Download Print this page

IHP BLB36SF Series Quick Start Manual

Brick liner kits

Advertisement

Quick Links

BLB36SF AND BLB42SF SERIES BRICK LINER KITS
[FOR USE WITH MODELS: VRT2036/42, VCT2036/42, OAKRIDGE36/42]
KIT CONTENTS
2 ea. Side Firebrick Panels
1 ea. Rear Firebrick Panel
2 ea. Retainer Brackets
2 ea. #10 Screws
1 ea. Instruction Sheet
Cat. No.
Model
F1054
BLB36SF
36" White Stacked Ceramic Fiber Brick Liner
F1056
BLB42SF
42" White Stacked Ceramic Fiber Brick Liner
REQUIRED TOOLS
Phillips Screwdriver
5/16'' Hex Socket Wrench or Nut Driver
GENERAL INFORMATION
Attractive brick fi rebox liner kits are available for 36" and 42" models
listed above.
READ ENTIRE INSTRUCTION SHEET BEFORE STARTING THE
INSTALLATION
THE FIREPLACE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarifi cation of these instructions
or are not qualifi ed to properly install this kit, contact you local
distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
• Turn off, unplug, and let fi replace cool before install-
ing brick liner. Only a qualifi ed service person should
service and repair fi replace.
• A qualifi ed service person must connect and discon-
nect fi replace to gas supply. Follow all local codes.
Description
r
WARNING
P/N 127152-01
Rev. B, 04/2017
If already installed, you must remove log base
assembly before installing brick liner. Refer to log
base assembly owner's manual.
NOTE: Some installations may require the gas supply line to be
disconnected before removing log assembly. If so, call a qualifi ed
service person to disconnect gas supply from fi replace.
IMPORTANT: Always handle fi rebrick panels with two hands.
Retaining
Bracket
Side
Firebrick
Gas Line
Panel
Knockout
Figure 1 - Brick Liner Kit
IHP.us.com
HEARTH PRODUCTS
KITS AND ACCESSORIES
FIREBOX LINER KITS
36/42 FIREPLACES
NOTICE
Screw
Rear Firebrick Panel
Screw
Retaining
Bracket
Side Firebrick Panel
1

Advertisement

loading

Summary of Contents for IHP BLB36SF Series

  • Page 1 Side Firebrick Panel If any of these parts are missing or damaged, contact your dealer or IHP.us.com for referral information. Figure 1 - Brick Liner Kit WARNING • Turn off, unplug, and let fi replace cool before install- ing brick liner.
  • Page 2 Figure 2 - Firebrick Panels with Retaining Brackets and Gas Knockout IHP reserves the right to make changes at any time, without notice, in design, materials, specifi ca- tions, prices and also to discontinue colors, styles and products. Consult your local distributor for fi...

This manual is also suitable for:

Blb42sf seriesF1054F1056