Installation Tools; Hard Drive Installation - TP-Link VIGI Installation Manual

Installation Site
32 Channel Network Video Recorder
VIGI NVR4032H
When installing the device on a rack or a flat workbench, attach much
importance to the following items:
The rack or workbench is flat, stable, and sturdy enough to support the
■
weight of 5.5 kg at least.
The rack or workbench has a good ventilation system. The equipment
■
room is well ventilated.
The rack is well grounded. Keep the device less than 1.5 meters away
■
from the power socket.
2.3

Installation Tools

Phillips screwdriver
■
ESD-preventive wrist wrap
■
Cables
■
Note:
These tools are not included with our product. If needed, you can purchase them
separately.
2.4

Hard Drive Installation

When installing for the first time, please prepare a 3.5-inch hard disk
drive (HDD). It is recommended to use the HDD of surveillance or enter-
prise level. Before installation, please disconnect the power from the
network video recorder (NVR).
1. Remove the fixing screws on the side and back panels to open the
cover of the NVR.
6