2.6
Storage devices
The system supports twelve (12) 2.5" hot-swap SATA/SAS/NVMe storage devices (up to 8 x
NVMe/SAS/SATA + 4 x NVMe/SATA). Storage devices installed on the storage device tray
connect to the motherboard SATA/SAS/NVMe ports via the SATA/SAS/NVMe backplane.
Bay 1
Bay 2
•
•
•
2.6.1
Installing a 2.5" hot-swap SATA/SAS/NVMe storage
device
1.
Push the spring lock to the right (A), and then pull the tray lever outward (B) to release
the storage device tray. The storage device tray ejects slightly after you pull out the
lever.
2-18
Bay 3
Bay 5
Bay 4
Bay 6
Bays 1 to 8 support NVMe/SATA. SAS support requires an optional HBA/RAID card.
Bays 9 to 12 support NVMe/SATA.
All bays support 2.5" drives with trays.
Tray lever
Bay 7
Bay 9
Bay 8
Bay 10
Spring lock
Chapter 2: Hardware Information
Bay 11
Bay 12