Table of Contents
Advertisement
3.2.1
Attaching the rack rails
•
•
•
•
•
Installing the rack rail
To install the rack rails into the rack:
1.
Select a desired space on the rack.
A 1U space consists of three
square mounting holes with two
thin lips on the top and the bottom.
2.
Align and insert the front end of the
appropriate rack rail (left and right) into
the front rack post.
3-6
Ensure that the rack rail cabinet and the rack posts are stable and standing firmly on a
level surface.
We strongly recommend that at least two able-bodied persons perform the steps
described in this guide.
We recommend the use of an appropriate lifting tool or device, if necessary.
The installation steps in this section uses a 1200 mm rack rail as an example, the
installation steps for a 1000 mm rack rail is exactly the same.
The illustrations in this section are for reference only.
Front rack post
Front end of rack rail
M5X13.5L extended nut
(needs to be manually installed)
Chapter 3: Installation Options
1U
Advertisement
Table of Contents
