2.4
Storage devices
The ESC4000 DHD G4 series supports 2.5-inch storage devices. The storage device installed
in the storage device bay connects to the motherboard via the backplane.
Storage bay 1
Storage bay 2
2.4.1
Installing a storage device into bay 1 or 2
1.
Press the spring lock.
2.
Pull the tray lever outwards to remove
the storage device tray.
3.
Prepare the storage device and the
bundled set of screws.
4.
Place the storage device into the tray (A)
then secure it with four screws (B).
2-14
Storage bay 3
Storage bay 4
Chapter 2: Hardware Setup